The program of the intensive course "Application of agricultural drones and UMO technology: everything an efficient farmer needs to know"

March 18, 2024
Програма курсу-інтенсиву «Застосування агродронів та технологія УМО: все, що має знати ефективний аграрій»
Published on  Updated on  

The international group of companies DroneUA announces the detailed program of the intensive course "Application of agricultural drones and UMO technology: everything an efficient farmer needs to know", which will be held on March 21-22, 2024 in Kyiv. 

As part of the course, there will be a detailed analysis of the advantages and possibilities of applying the technology of ultra-small-volume spraying (ULM) on the main field crops, and we will also teach in real conditions how to work with spraying drones: from a technical review to the creation of work missions.

Conducting time:

March 21 from 9:00 a.m. to 5:00 p.m. - Audition day. 

March 22 from 9:00 a.m. to 4:00 p.m. - Field training.

Day 1. Auditory. March 21, 2024

8:30-09:20

Registration. Morning coffee.

 

09.20 09:30

Greeting.

Resource saving, climate orientation and profitability of production: agricultural drones and UMO as a requirement of the time.

Representative 

GC DroneUA

09:30 – 10:00

From theory to practice: the "salt" of UMO technology for the use of agricultural drones

Ihor Bordyuzha, candidate of of Sciences, NULES of Ukraine

 

Cases. Introduction of agrochemical and biological preparations according to UMO technologies.

 

10:00 – 10:30

Optimizing the flow rate and achieving efficiency using UMO technology. Case from Syngenta Ukraine”

Evgeny Buyun,

regional technical expert "Syngenta Ukraine"

10:30 – 11:00

Gig-tech tandem: drones and biotechnology. Time from "BTU-CENTER"

Oleksandr Otsabryk, head of sales department "BTU-CENTER"

11:00 – 11:30

Peculiarities of using fertilizers: application of an anti-stress agent by agrodrone. Case from "EKOORGANIC"

Oleksandr Katerynchuk, head of the department of agricultural technologies "EKOORGANIC"

11:30 –

12:00

How to reveal the potential of pesticides for UMO? Case from "Spraytek Ukraine"

Pavlo Andrusyk, commercial director of Spreytek Ukraine

12:00 – 12:30

Reduction of drift as the main prerequisite for the effective use of PPE by drones. Case from "Agro Expert"

Oleksandr Karnaukh, Product Manager of the Fertilizers and Microfertilizers Division of the Agro Expert Company

12:30 – 13:00

Analysis of the technological map of protection and nutrition for field crops with the use of spraying drones:

  • rape;
  • corn;
  • Sunflower.

Mykola Dolya,

Dr. S.-G. of Sciences, professor of the National Institute of Science and Technology of Ukraine

13:00 – 13:30

Resource saving. Economic-mathematical model of using drones for UMO:

We count "no losses" and additional productivity.

Anatoly Bezolyuk,

sales manager of XAG Ukraine (GK DroneUA)

13:40 – 14:00

Lunch Break.

 
 

Agrodrones from "A" to "Z". Technical presentation of the model line of XAG agrodrones

Maksym Mykhaylov, head of the technical department of DroneUA Group

14:40 – 16:40

  • technical characteristics and design: agricultural drones XAG P100 Pro and XAG V40;
  • review of the working set;
  • registration and activation of the drone in the application;
  • creation of the mission: methods of site measurement, calibration, setting parameters of input and route, terrain tracking radar, spillage rate, capture width and working height;
  • familiarization with scheduled maintenance of the drone.

Vitaly Hryhorchuk,

XAG technical expert (GK DroneUA)

Goncharenko Vladyslav,

Trainer-pilot, GC DroneUA

16:40 – 17:00

Summing up.

Free communication.

Representative

GC DroneUA

Day 2. Field training. March 22, 2024

09:00

Registration.

 

09:30 - 

10:00

Demonstration of the XAG P100 Pro agricultural drone

  • RevoSpray mode;
  • RevoCast mode;
  • RealTerra mode;

Vitaly Hryhorchuk, XAG technical expert (GK DroneUA)

Goncharenko Vladyslav, Trainer-pilot, GC DroneUA

10:00 – 10:30

Demonstration of XAG V40 agricultural drone.

10:30- 11:00

Demonstration of the ground robotic platform XAG R150.

11:00- 11:30

Coffee break

 

11:30 – 15:00

Working in groups is practical:

  • connecting all devices;
  • follow the contour of the plot;
  • daily routes for the drone;
  • setting operating parameters of the system;
  • front flight checks of the drone;
  • launching the drone and completing the mission.

Dmytro Ivashchenko, Trainer-pilot, GC DroneUA

Vadym Samoilenko,

Trainer-pilot, GC DroneUA

15:00 - 16:00

Summing up.

Awarding certificates.

Informal communication.

 

The organizers do not cover accommodation and transport costs. The exact location of the training is notified to registered participants.

Published on  Updated on  

DroneUA is an international system integrator of unmanned solutions and robotics.

On the market of Ukraine and Eastern Europe, the DroneUA group of companies is the largest importer and distributor of leading drone manufacturers in the world and represents technological solutions from the brands XAG, EcoFlow, Pix4D, Parrot, Chasing, DroneDeploy, AgroCares and others.

The group of companies has its own engineering, production and service divisions, as well as an open data processing center. Technological solutions presented by DroneUA are used on more than 4 million hectares of cultivated areas of Ukraine. According to the results of the 2021 and 2022 agricultural seasons, more than 2.2 million hectares were protected with drone sprayers from DroneUA.

DroneUA is among the top three most innovative businesses in the agricultural sector of Ukraine according to FORBES and among the twenty most innovative enterprises of Ukraine.

The group of companies continues to expand the list of technological brands that it presents on the Ukrainian market, and is active in agriculture, the oil and gas industry, as well as in the fields of energy, geodesy and topography.

Contact us